Boston Blend Strips

Boston Blend Strips is a real, all natural Thin Stone Veneer that has been sawn and split for quick, easy, and seamless installation. Each piece is 1.5 inches in height, sawn on all 4 sides and back, with a beautiful split textured face. It highlights the vibrant earth tones of New England Fieldstone including grays, blacks, tans, pinks and whites.

These are individual stones, not panels, sawn, split and ready for a seamless installation. Available in both flats and corners.

(Click images above to view slideshow or Click here for Searchable Gallery)

Height: 1.5 inch Length: 3-12 inch Thickness: 1 inch Weight: Less than 14 lbs/sf

Flats: 5 sf box, 168 sf crate 
Corners: 5 lf box, 75 lf half crate, 150 lf full crate

Boston Blend Strips Corners

Corners are made from full thickness stone with a minimum 2 inch return, to create the appearance of the full thickness stone without the added weight. Strips give a clean, modern look that is perfect for an interior kitchen back splash, bathroom, wainscoting, fireplace, chimney, exterior stone siding, accents, or any other residential or commercial architectural stone project.

Download Spec Sheet (Pdf)

The Boston Blend Strips product is a modification of our Boston Blend Ledgestone designed to give the customer an easy way to install the stone with a very tight fitting dry stack appearance with no mortar joints. The stones will stack up tightly against each other with minimal trimming by the installer. All of the trimming waste and trimming labor is done by Stoneyard.com in our controlled shop environment so the installer doesn't have to do this on site. If a customer were to try to install our Ledgestone to look like the Strips they would have a much higher waste factor of between 40-50% because they would have to cut off part of the top and bottom of every piece.

Order FREE SAMPLES